You can download the Transit Configuration Software using the button below:
This tool allows you to perform the following actions:
- Update the firmware of the reader
- Modify the customer code(s) of the reader
- Customize the RGB-LED settings
- Adjust the relay hold time
- Set the repeat time
- Change the frequency channel
- Identify the customer code(s) programmed in tags and boosters
- Monitor the internal temperature of the reader
This tool replaces the following tools: P81test, Picload.
Release notes can be found at the end of this article.
Video Tutorials:
The first video below demonstrates the Customer Code Wizard, a tool that helps you identify the customer code embedded in a tag or booster.
The second video provides a step-by-step guide on how to change the customer code of a TRANSIT reader
Release notes
Version 1.06
- automatic update based on ICS
- supports TLS 1.3
Version 1.05
- updated firmware P80 v3.01, added reading vehicle-id for boosters
Version 1.04
- updated firmware P82 v3.11
- http request support added for tls connections
- after restart or reset optionally reconnect (possible baudrate or data format has changed)
- improved config checkboxes for enable vehicle/driver id
- limit setting frequencies (etsi, fcc)